Sometimes when you flash a rom on your galaxy device it may be stuck in boot loop. And will not let you proceed further but just turn of and on over and over again.
What you could do is try this method. There’s always odin method but that will restore your galaxy device to stock. Boot Loop is a simple problem and it is not that big of an issue. This happens because the rom you flash replaces the kernel of your original software that you had before installed. So if you are stuck in BootLoop then follow me.
How To Get Out If Stuck in BootLoop
The process when your galaxy phone fails to boot when you flash a custom rom and it just goes on and off periodically is called bootloop. It has a simple Fix.
First of all ensure that you are stuck in bootLoop, The logo screen just staying on for sometime and mobile not booting into the software is not called bootloop.
Now that you are stuck in bootloop. The first thing you must not do is that you must not take out the Storage or delete your Rom’s Zip file from which you’ve tried to Flash the rom.Dont delete it as otherwise you will need to Download the entire file again and repeat the steps.
Turn on your phone and let it bootloop for 1-2 times.
Now hold down the home button, the power button and the volume down button to go to the CWM mode. Or if that whichever combination that is essential for your galaxy to goto CWM mode.
First it will seem difficult while stuck in bootloop to access the CWM . But CWM is accessible. Just try holding the buttons and try many times untill you get into CWM recovery Mode.
Now that you are in CWM , the first thing is to scroll down and Wipe Factory Data reset , now after factory data reset , go to wipe Dalvik Cache and wipe the dalvik cache of your Galaxy smartphone. Again this will work for any samsung galaxy device, either tab or mobile.
Now that you have wiped factory data reset and Dalvik cache, goto the storage, where your rom’s zip file is located. Do the same thing that you did when installing or flashing the zip file from CWM.Install from internal storage and Flash the zip file of your rom that you wanted to install.
It will install properly and will then boot up into the software just fine.You won’t be stuck in bootloop again.
Bootloop often happens when you flash a zip file from the storage and CWM. The phone turns off in the middle of installing the zip file and goes into continuos bootloop. This can be overcome by the method i’ve described above.
IF you still cannot get rid of stuck in bootloop error then the last option is to go to into Download Mode, Flash the stock firmware from odin from your PC or Laptop and install that Firmware. This will surely fix the error and will restore your galaxy to original default factory settings/firmware.
If you are still having problems, tell me in the comments, i’ll get back to you as soon as possible.
